STAINLESS
STEEL BRAIDED HOSE AND REUSABLE ENDS |
 Stainless steel braided racing hose
has a C.P.E. synthetic rubber tube bonded with a woven nylon
braid and is covered and secured with a 308 stainless steel
outer braid. Made to resist extreme heat, abrasion and
corrosion. Operating temperature is from -40 to +350 deg. F.
and can withstands working pressures up to 1000 PSI. For
use with hydrocarbon and alcohol based fuels, motor oils,
and coolant.
Note: no returns on hose cut less then 6 feet |
#23-603 -6 Stainless Steel Braided hose, per foot.
#23-604 -8 Stainless Steel Braided hose, per foot.
#23-605 -10 Stainless Steel Braided hose, per foot.
#23-606 -12 Stainless Steel Braided hose, per foot. |
back to top |
|
|
REUSABLE
ALUMINUM HOSE ENDS |
 Reusable Aluminum full swivel hose ends for
our stainless braided hose are red and blue, one piece
billet tube construction, and have viton o-rings.
STRAIGHT HOSE ENDS for Steel Braided Hose.
#23-623 straight end for -6 hose to 37 deg female -6 AN
#23-624 straight end for -8 hose to 37 deg female -8 AN
#23-625 straight end for -10 hose to 37 deg female -10 AN
#23-626 straight end for -12 hose to 37 deg female -12 AN
45 DEG. HOSE ENDS for Steel Braided Hose.
#23-643 45 deg. end for -6 hose to 37 deg female -6 AN
#23-644 45 deg. end for -8 hose to 37 deg female -8 AN
#23-645 45 deg. end for -10 hose to 37 deg female -10 AN
#23-646 45 deg. end for -12 hose to 37 deg female -12 AN
90 DEG. HOSE ENDS for Steel Braided Hose.
#23-663 90 deg. end for -6 hose to 37 deg female -6 AN
#23-664 90 deg. end for -8 hose to 37 deg female -8 AN
#23-665 90 deg. end for -10 hose to 37 deg female -10 AN
#23-666 90 deg. end for -12 hose to 37 deg female -12 AN
90 DEG. O-RING PORT HOSE ENDS for Steel Braided Hose.
#23-6756 90 deg. end for -10 hose to female -12 AN o-ring port
#23-6766 90 deg. end for -12 hose to female -12 AN 0-ring port
|
back to top |
|
|
BLUE
C.P.E. RACING HOSE AND PUSH-ON ENDS |
 |
| Blue C.P.E. Racing Hose has a
rubber inner tube bonded to a reinforced Textile
braid and covered with blue synthetic rubber cover.
Compatible with oils, fuels, and coolants. Designed
to operate at 250 P.S.I. and 300F. Use with push
in and lock ends. Note: no returns on hose cut less then 6 feet |
#23-705 -10 C.P.E. hose, per foot
#23-725 -Brass push in hose ends -10 hose to female -10 AN. (2 pack)
#23-725A -Alum. push in hose ends -10 hose to female -10 AN. (2 pack)
|
back
to top |
|
|
T ADAPTER
FITTINGS |
 These Adapter Fittings can be used
with our remote oil filter adapters, to connect a Accusump.
#23-245T Brass T adapter. 1/2" N.P.T. to -10 AN.
#23-245TA Alum. T adapter. 1/2" N.P.T. to -10 AN. |
back to top |
|
|
|
|
|
O-RING
ADAPTER FITTINGS |
These Aluminum Adapter
Fittings with viton o-rings, can be used with our filters and oil thermostats.
| 
ALUMINUM PORT PLUGS
#23-460A 1-1/16 -12 AN port plugs. (2 pack)
ALUMINUM PORT PLUGS WITH MAGNET
#23-460M 1-1/16 -12 AN port plug with 2" magnet.
| 
ALUMINUM KNURLED PORT CAP
#23-460N 1-1/16 -12 AN port cap.
ALUMINUM PORT TO N.P.T.
#23-404A 1-1/16" -12 to 1/2" N.P.T. reducers (2 pack)
| 
ALUMINUM PORT TO AN FITTINGS
#23-463A 1-1/16" -12 port to -6 male AN (2 pack)
#23-464A 1-1/16" -12 port to -8 male AN (2 pack)
#23-465A 1-1/16" -12 port to -10 male AN (2 pack)
#23-466A 1-1/16" -12 port to -12 male AN (2 pack)
#23-468A 1-1/16" -12 port to -16 male AN (2 pack)
#98-005 Replacement 0-rings for 1-1/16" -12 port fittings (2 pack)
|
back to top |
|
|
NPT
ADAPTER FITTINGS |
 These Adapter Fittings can
be used with our remote oil filter adapters, remote canisters,
inline filters and power steering tanks. N.P.T. thread to AN 37
deg. flare.
Steel N.P.T. to AN fittings
#23-245 1/2" N.P.T. to -10 AN, steel adapter fitting.
#23-246 1/2" N.P.T. to -12 AN, steel adapter fitting.
#23-266 3/4" N.P.T. to -12 AN, steel adapter fitting.
#23-268 3/4" N.P.T. to -16 AN, steel adapter fitting.
Aluminum N.P.T to AN fittings
#23-233A 3/8" N.P.T. to -6 AN, alum. adapter fitting.
#23-234A 3/8" N.P.T. to -8 AM, alum. adapter fitting.
#23-245A 1/2" N.P.T. to -10 AN, alum. adapter fitting.
#23-246A 1/2" N.P.T. to -12 AN, alum. adapter fitting.
|
back to top |
|
|
|
|
|
Check Valve |
 Accusump's oil line Check valve
(#24-280) ensures all the oil being discharged out of
an Accusump goes to lubricate the engine bearings and is not fed back toward the pump.
To be used in a system where a remote filter or cooler is used.
#24-280 1/2" NPT to 1/2" NPT one way Check Valve. |
back to top |
|
