SBC fuel pump
insulator |
|
 #85-000 This SBC
Phenolic fuel pump Insulator is made to
take the place of the steel plate that is between the fuel pump and
the block on the SBC.
The insulator will limit the transfer of heat from the block into the
fuel pump, therefor
keeping the fuel passing through it cooler. |
back to top |
|
|
UNIVERSAL V8 fuel
pump insulator |
 #85-010 This universal
Phenolic fuel pump insulator works with
all domestic V8’s except Cleveland Fords and Oldsmobiles. The Phenolic
material will limit
the transfer of heat from the block into the fuel pump, therefor keeping
the fuel passing
through it cooler. It installs easily between the fuel pump and the
mounting boss on
mechanical fuel pumps. |
back to top |
|
|
Rochester 2bbl
spacers |
 #85-030 This 1"
thick spacer fits Rochester 2bbl carbs with
matching intakes.
Recommend or related parts
#85-520 Mounting Studs.
#85-032 This 1/2" thick spacer is for Rochester 2BBL carbs
with matching
intakes.
Recommended or related parts
#85-510 Mounting Studs. |
back to top |
|
|
Holley 2bbl
Spacer |
 #85-040 This is a
1" thick spacer for the Holley 2bbl
carbs with matching intake.
Recommended or related parts.
#85-520 Mounting studs. |
back to top |
|
|
Holley 4150/4160
4-hole carb spacers |
#85-150 1" thick spacer for 600+ CFM carbs.
Recommended or related parts.
#85-520 Mounting studs.
#85-152 1/2" thick spacer for 600+ CFM carbs.
Recommended or related parts.
#85-510 Mounting studs.
#85-155 2" thick spacer for 600+ CFM carbs.
Recommended or related parts.
#85-530 Mounting studs. |
back to top |
|
|
|
|
|
Holley 4150/4160
open carb spacers |
#85-160 1" thick open spacer.
Recommended or related parts.
#85-520 Mounting studs.
#85-162 1/2" thick open spacer.
Recommended or related parts.
#85-510 Mounting studs.
#85-165 2" thick open spacer.
Recommended or related parts.
#85-530 Mounting studs. |
back to top |
|
|
Holley 4500
open carb spacers |
#85-200 1" thick open spacer.
Recommended or related parts.
#85-520 Mounting studs.
#85-202 1/2" thick open spacer.
Recommended or related parts.
#85-510 Mounting studs.
#85-205 2" thick open spacer.
Recommended or related parts.
#85-530 Mounting studs.
|
back to top |
|
|
Holley 4500
four hole carb spacers |
#85-210 1" thick spacer.
Recommended or related parts.
#85-520 Mounting studs.
#85-212 1/2" thick spacer.
Recommended or related parts.
#85-510 Mounting studs.
#85-214 1/4" thick spacer.
Recommended or related parts.
#85-510 Mounting studs.
|
back to top |
|
|
|
|
|
Q-jet/spreadbore
carb spacers |
#85-250 1" thick spacer.
Recommended or related parts.
#85-520 Mounting studs.
#85-252 1/2" thick spacer.
Recommended or related parts.
#85-510 Mounting studs.
Please Note: Mounting studs will not work with
Q-jets. |
back to top |
|
|
Ford 4.6 2V intake spacer. |
#85-270
This 3/8" thick phenolic spacer mounts between the upper and lower intake on Ford V-8 4.6 two valve engines.
Limits heat transfer and improves airflow to increase performance. Includes a factory gasket so that there
is no interference with the stock linkage and hood.
|
back to top |
|
|
Ford 5.0 throttle body spacer |
#85-275
This 1/2" thick phenolic spacer mounts between the EGR spacer plate and the upper intake of a Ford V-8 5.0 valve engine. Limits heat transfer and improves airflow to increase performance. It has a EGR gas through hole,
which will eliminate the need to modify the EGR system. Being 1/2" thick, it allows the use of all stock linkage and air intake systems.
Can be used with aftermarket intakes where the openings are not more than 65 mm. Includes all needed gaskets and hardware.
|
back to top |
|
