SMALL
BLOCK CHEVY TIMING COVER |
 #21-900 Small Block
Chevy Timing Cover is
manufactured in the USA to O.E.M. specifications to ensure a
correct fit. The crank seal is precisely centered on the crank
for leakproof reliability. The cam button area is enlarged for
use with roller camshaft. They are stamped from 18 gauge steel
and have a gold iridite finished.
Recommended or related parts.
#88-900 SBC Timing Cover
Gasket. |
back to top |
|
|
|
|
|
LIFTER VALLEY
OIL BAFFLE |
 Lifter Valley Oil Baffles deflect hot
oil splashing from lifter bores away from the bottom of the intake
manifold. This baffle also holds lifters in their bores in the event
of a push rod or rocker-arm failure, preventing a loss of oil pressure
and possible bearing damage. |
|
#65-061 SBC Lifter Valley Oil Baffle, with holes for
valley vent tubes (#22-220).
back to top |
|
|
SMALL BLOCK CHEVY
LIFTER VALLEY VENT TUBES |
 SBC lifter valley vent tubes are designed
to be installed in the eight lifter valley drain back holes. These
2" tall vent tubes reduce crankcase pressure by allowing air to freely
pass through but not allowing oil to drain directly onto spinning
crankshaft absorbing horsepower and increasing temperature.
The oil is redirected to the sump through the timing cover and
rear block holes.
#22-220 SBC lifter valley vent tubes sold
in a pack of 8 per set.
Recommended or related parts.
#65-061 Lifter Valley Baffle. |
back to top |
|
|
LIFTER
VALLEY SCREEN KIT |
 |
 |
| Our Lifter Valley Screen Kit minimizes damage
caused by keeping debris from valve train breakage away from the
engine's rotating assembly and oil pump pickup. These preformed screens
are secured with high strength epoxy over all the oil drain back holes. |
|
#22-250 SBC Oil Galley Screen And
Plug Kit. comes with Allen socket plugs for the center valley holes.
#22-270 Ford 302/351W Oil Galley Screen Kit. |
back to
top |
|
|
Universal
Fan spacers |
 Billet Aluminum Fan Spacers machined to be light weight
and strong. Come with adapter bushing for 5/8" and 3/4" water pump shafts.
#75-610 1" Fan Spacer with bolts
#75-615 1.5" Fan Spacer with bolts
#75-620 2" Fan Spacer with bolts
#75-625 2.5" Fan Spacer with bolts
#75-630 3" Fan Spacer with bolts
#75-635 3.5" Fan Spacer with bolts |
back to top |
|
|
|
|
|
SMALL BLOCK FORD EXHAUST BLOCK OFFS |
 #84-600 SBF Aluminum exhaust block off plates. Fit SBF cylinder heads with standard exhaust pattern. Sold in pairs.
|
back to top |
|
|
BIG BLOCK FORD EXHAUST BLOCK OFFS |
 #84-610 BBF Aluminum exhaust block off plates. Fit Ford 429/460 cylinder heads with standard exhaust pattern. Sold in pairs.
|
back to top |
|
|
|
|
|
INTAKE MANIFOLD BLOCK OFF FOR 4500 PATTERN |
 #84-200 Aluminum block off plate for intake maniflods. Fit intake manifolds with standard 4500 (Dominator) carb. patterns.
|
back to top |
|
#84-100 SBC Aluminum exhaust block off plates. Fit SBC cylinder heads with standard exhaust pattern. Sold in pairs.
#84-150 Aluminum block off plates for intake manifolds. Fit intake manifolds with standard 4150/4160 (square bore) carb patterns.