|
|
|
|
|
|
|
|
|
Oil input
adapters |
| These adapters provide a simple way to connect into
the oil passages of your engine. Used on the installation of an external oil
pump both wet and dry sump applications or an Accusump. |
|
|
Sandwich adapters |
| Sandwich adapters mount between the engine block and
the oil filter and provide access to the engines oiling passages. They are a
simple way to install an oil cooler or to be used as a port for oil
input while eliminating the need for a remote oil filter and all the
associated hardware. |
|
|
OIL FILTER BLOCK
OFF AND INPUT ADAPTER |
 #22-520
Chevy oil input adapter with 1/2" N.P.T port
The adapter can be used with a dry sump or an external pump wet sump system.
Fits both Small and Big Block Chevy and comes with
all hardware & O-rings.
#22-521
Chevy oil input adapter with -12 O-ring port
The adapter can be used with a dry sump or an external pump wet sump system.
Fits both Small and Big Block Chevy and comes with
all hardware & O-rings.
#98-001 Replacement O-Ring kits. |
back to top |
|
|
CHEVY BILLET
OIL INPUT SANDWICH ADAPTERS |
 Chevy oil input adapter replaces the
Stock Chevy Bypass, so the engine receives filtered oil all the time.
Machined from billet aluminum, with two oil input ports, one before
filtration (for an external oil pump) and one after filtration
(for an ACCUSUMP). With these
adapters the oil filter mounts in
the stock location only 1-1/2" lower. This unit comes complete
with O-Rings. |
#22-550 SBC Oil Input Adapter.
#22-560 BBC Oil Input Adapter up to Mark IV.
#98-002 For replacement O-Ring kits. |
back to top |
|
|
UNIVERSAL
BILLET OIL INPUT SANDWICH ADAPTERS |
 Universal Oil input Adapters are
machined from billet aluminum, with an oil input port before
filtration. These adapters mount the oil filter in the stock
location only 1-1/4" lower, comes with O-Rings. |
#22-565 Oil input Adapter 3/4 -16 thread
and 2-5/8" standard O-Ring.
#22-566 Oil input Adapter 13/16 -16 thread
and 2-5/8" standard O-Ring.
#22-567 Oil input Adapter 18mm -1.5 thread
and 2-5/8" standard O-Ring.
#22-568 Oil input Adapter 20mm -1.5 thread
and 2-5/8" standard O-Ring.
#22-569 Oil input Filter Adapter 22mm -1.5
thread and 2-5/8" standard O-Ring.
#98-004 For replacement O-Ring kit. |
back to top |
|
|
